Setting Authentication Server - Oki COREFIDO B822dn User Manual

 Local User List: Set the users you want to assign to this group.
 Kerberos User List: Set the Kerberos users you want to assign to this group.
7
Click [Submit].
You can copy already registered groups and add new groups based on the copied settings.
When you click [Copy] below the group name, the group information screen will be displayed, so change
and register the required items.

4. Setting authentication server

When performing user authentication using the server authentication method, set the server settings from the
web browser.
Here is an example of using an LDAP authentication server.
1
Open the web page of this machine.
Opening the web
2
Log in as an administrator.
Logging in as an
3
Click [Printer Settings].
4
Click the Menu button on the upper right corner, and then select [User Management] - [LDAP
Authentication].
5
Create user information based on the LDAP server information.
Input the LDAP key from which each value is obtained.
 Display name: Set the LDAP key to obtain the display name of user information.
 E-mail address: Set the LDAP key to obtain the E-mail address of user information.
 Language Code: Set the LDAP key to obtain the language code of user information.
 Group: Set to assign users to a group automatically. Set the LDAP key to obtain the assigned group
name. When a group with a group name defined by the same text string as the acquired text exists in
this machine, each group is assigned. When it does not exist, a group with the group name of
acquired text string is automatically created and assigned.
 PIN: Set the LDAP key to acquire the PIN to use for PIN authentication. If you do not use PIN
authentication, you do not need to input anything.
 User Name: Set the LDAP key of the user name registered in the LDAP server.
The default value for user name is the LDAP key "sAMAccountName" for a Windows server.
Users using a Windows server do not need to change this setting.
 Cache authentication information: Set whether authentication information is temporarily stored in this
machine. The factory default setting is [Disable] (Do not save temporarily). When [Enable] is set, user
page(P.213)
administrator(P.214)
- 241 -
Management of this machine