Inputting The Factory Default Admin Passwords - Oki COREFIDO B822dn User Manual

Checking against the sticker on the back of the machine
1
Check the leftmost 10 digits of the alphanumeric characters on the sticker attached on the back
of the machine.
2
You may convert the upper-case letters into lower-case ones and use the converted string as the
admin password.

Inputting the factory default admin passwords

This section explains the procedure assuming that the factory default admin password is "ab01234567".
Checking the factory default admin
1
Check that "Ready To Print" appears on the display.
If the machine is in the power saving mode, press «OK» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and then
press «OK».
3
Press ▲ once to check that "a" is displayed, and then press «OK».
The entered character is displayed in "*" and the cursor moves to the next position.
4
Press ▲ twice to check that "b" is displayed, and then press «OK».
5
Press ▼ for ten times to check that "0" is displayed, and then press «OK».
6
Press ▼ for nine times to check that "1" is displayed, and then press «OK».
passwords(P.207)
- 209 -
Management of this machine