Oki COREFIDO B822dn User Manual page 124

Time Zone
Daylight Saving
Setting method
SNTP Server (Primary)
SNTP Server(Secondary)
Time Setup
Power Setup Auto Power Off
Power Save Setting
Tray Setup Unit of Measurement
Default Paper Size
Others Setup Paper Feed
Roller
Counter
Clear
Flash
Memory
Setup
Job Log
Setup
Security
Item
MP Tray Clear
Tray1 Clear
Tray2 Clear
Tray3 Clear
Tray4 Clear
Initialize
Format Partition
Save Job Log
Clear Job Log
Access Control
Changing settings from the operator panel
Factory
default
setting
+9:00 Sets the GMT time zone.)
Value range: -12:00 ~ +13:00 (in increments
of 15 minutes)
Off Sets the daylight saving (daylight saving
time).
Manual Selects how to set the time.
Setup
(Blank) Sets the SNTP server used to set the current
date and time. Up to 64 characters can be
(Blank)
used.
Displayed when [Auto Setup] is selected as
the setting method.
2001/01/01 The time is set at factory delivery. Change
00:00:00 the date and time if necessary.
Displayed when [Manual Setup] is selected
as the setting method.
Auto Config Sets the actions of Auto Power Off.
[Auto Config]: Auto Power Off does not work
for network connection (wired/wireless).
[Enable]: Auto Power Off works regardless
of the connection method.
[Disable]: Auto Power Off does not work.
Mode1 Set the switching menu between the power
save mode and low temperature standby
mode.
[Mode1]: Sets it to the power save mode.
Power consumption in the power saving
mode is lower than that in Mode2.
[Mode2]: Sets it to the low temperature
standby mode. Print start in the power
saving mode is faster than that in Mode1.
millimeter Sets the unit of measurement for the custom
size (mm/inch).
A4 Sets the default paper size of a custom size.
Execute Clears the counter after the paper feed roller
of the MP tray is replaced.
Execute Clears the counter after the paper feed roller
Tray1 is replaced.
Execute Clears the counter after the paper feed roller
Tray2 is replaced.
Execute Clears the counter after the paper feed roller
Tray3 is replaced.
Execute Clears the counter after the paper feed roller
Tray4 is replaced.
Execute Initializes the flash memory.
PCL Formats the specified partition of a flash
memory.
Disable Sets whether to save a log of print data.
Execute Clears the log of saved print data.
Displayed when [Save Job Log] is enabled.
Disable Sets whether to enable access control.
- 124 -
Description