Adjusting the buzzer volume
The volume of the following buzzers is adjustable in three steps.
When a paper jam or any other error occurs
When printing has completed
When you use AirPrint, Mopria or IPP Everywhere to find a printer
1
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and then
press «OK».
2
Press ▲ or ▼ to input the admin password, and press «OK».
Admin
Password(P.207)
3
Press ▲ or ▼ several times to select [Buzzer Setup], and then press «OK».
4
Press ▲ or ▼ several times to select the item you want to change, and then press «OK».
5
Press ▲ or ▼ to select the volume to be set, and then press «OK». Check that [*] is displayed to
the left of the selected setting.
6
Press «CANCEL» to return to the standby screen.
Changing settings from the operator panel
- 103 -