About Installation; Installation Environment - Oki COREFIDO B822dn User Manual

About Installation

Installation environment

Install this machine in the following environment.
Ambient temperature: 10℃ ~ 32℃
Ambient humidity: 20% ~ 80% RH (relative humidity)
Max. wet-bulb temperature: 25℃
 Make sure there is no condensation. Otherwise malfunction may be caused.
 If the ambient relative humidity is 30% or less, use a humidifier or static prevention mat.
 The operating noise of this machine may be a concern depending on the installation environment. If the operating
noise is a concern, it is recommended to install this machine in a remote location or in a separate room.
 Do not install this machine near combustion appliances that produce combustion emissions. Otherwise, the printing
may be lighter.
 Do not install it close to high-temperature locations or naked flames.
 Do not install it in locations where chemical reactions occur (e.g., laboratories).
 Do not install it close to combustible solutions such as alcohol and thinners.
 Do not install it within reach of little kids.
 Do not install it in an unstable location (e.g., unsteady tables and sloping locations).
 Do not install it in humid or dusty locations, or in locations exposed to direct sunlight.
 Do not install it in environments with salt air, corrosive gas, NOx or SOx.
 Do not install it in locations subject to frequent vibration.
 Do not install it in locations where the air vents of this machine are blocked.
 Do not install directly on long-hair rugs or carpets.
 Do not install in locations with poor air circulation or ventilation like sealed rooms.
 Ensure adequate ventilation if using it continuously for long hours in a small room.
 Keep it away from strong magnetic fields and noise sources.
 Keep it away from monitors and TVs.
 To move the machine, stand in front of and behind the machine, hold the handle at the bottom of the machine, and
carry it.
Preparing and connecting this machine to your PC
- 18 -