Network Card Setup Utility (macOS)
The network setting can be done using the Network Card Setup Utility.
TCP/IP must be enabled to use the Network Card Setup Utility.
Setting the IP address
1
Start the Network Card Setup Utility.
Installing
software(P.256)
2
Select this machine from the list.
3
Select [IP Address] from the [Actions] menu.
4
Specify the settings as necessary, and click [Config].
5
Input the admin password, and click [OK].
Admin
Password(P.207)
6
Click [OK] to enable the new settings.
The network card of this machine will restart.
Opening the web page
If you have not changed [IP Address Set], you cannot select [SET], so click [Cancel].
1
Start the Network Card Setup Utility.
Installing
software(P.256)
2
Select this machine from the list.
3
Select [View Printer Web Pages] from the [Actions] menu.
The web page will start, and the status page of this machine will be displayed.
Exiting the Network Card Setup utility
1
Select [Exit the Network Card Setup Utility] from the [Network Card Setup Utility] menu.
- 285 -
Useful software