Oki COREFIDO B822dn User Manual page 115

System Power Save Time
Adjust
Sleep Time
Auto Power Off Time
Clearable Warning
Auto Continue
Manual Timeout
Timeout Injob
Timeout Local
Timeout Network
Jam Recovery
Error Report
Hex Dump
Item
Changing settings from the operator panel
Factory
default
setting
1 minute Sets the time to switch to power saving
mode.
Value range: 1 minute, 2 minutes, 3 minutes,
4 minutes, 5 minutes, 10 minutes, 15
minutes, 30 minutes, and 60 minutes
1 minute Sets the time to shift from power saving
mode to sleep mode.
Value range: 1 minute, 2 minutes, 3 minutes,
4 minutes, 5 minutes, 10 minutes, 15
minutes, 30 minutes, and 60 minutes
4 hours Sets the time to turn off the power
automatically after entering standby mode.
Value range: 1 hour, 2 hours, 3 hours, 4
hours, 8 hours, 12 hours, 18 hours, and 24
hours
OK button Sets the timing to clear the recoverable error
display.
Off Sets whether or not to automatically restore
this machine when a memory overflow or
tray request occurs.
60 seconds Sets the waiting time for loading the paper
when you print with [Feed paper individually]
checked in the printer driver.
Value range: Off, 30 seconds, and 60
seconds
40 seconds Sets the time from loss of the data receipt
(canceled by PostScript) until force-printing.
Value range: Off, 5 seconds, 10 seconds, 20
seconds, 30 seconds, 40 seconds, 50
seconds, 60 seconds, 90 seconds, 120
seconds, 150 seconds, 180 seconds, 210
seconds, 240 seconds, 270 seconds, and
300 seconds
40 seconds Sets the time to keep each port open after
printing. (Excluding the network)
It can be set from 0 seconds to 300 seconds
in increments of 5 seconds.
90 seconds Sets the time to keep the network port open
after printing.
It can be set from 0 seconds to 300 seconds
in increments of 5 seconds.
ON Sets whether to reprint pages not printed
due to a paper jam after the paper jam is
cleared.
When [Off] is selected, the printing process
including pages missed due to the paper jam
will be canceled.
Off Sets whether to print an error report when an
internal error occurs.
Execute Prints the data received from the PC in
hexadecimal dump. To exit this mode, turn
off the power.
- 115 -
Description