Network Card Setup Utility (macOS)
The network setting can be done using the Network Card Setup Utility.
TCP/IP must be enabled to use the Network Card Setup Utility.
Setting the IP address
1
Start the Network Card Setup Utility.
Installing
software(P.247)
2
Select this machine from the list.
3
Select [IP Address] from the [Actions] menu.
4
Specify the settings as necessary, and click [Config].
5
Input the admin password, and click [OK].
Admin
password(P.196)
6
Click [OK] to enable the new settings.
The network card of this machine will restart.
Making web settings
You can set the network of this machine after starting the Network Card Setup Utility.
Enabling web settings
1
Start the Network Card Setup Utility.
Installing
software(P.247)
2
Select this machine from the list.
3
Select [Web Page Settings] from the [Actions] menu.
4
Check [Enable device web settings], and click [Config].
5
Input the admin password, and click [OK].
Admin
password(P.196)
6
Click [OK] in the confirmation window.
Opening the web page
1
Start the Network Card Setup Utility.
Installing
software(P.247)
2
Select this machine from the list.
3
Select [View Printer Web Pages] from the [Actions] menu.
The web page will start, and the status page of this machine will be displayed.
Exiting the Network Card Setup utility
1
Select [Exit the Network Card Setup Utility] from the [Network Card Setup Utility] menu.
- 282 -
Useful software