Master Settings Reference Chart; Ference Chart - Pentair FLECK 5800 XTR2 Service Manual

MASTER SETTINGS REFERENCE CHART

Before entering Master Settings, please contact your local professional water dealer.
CAUTION
Screen Name Parameters
Format Language
Units
Hardness Units
Assistance Name Free-form text
Assistance Phone Free-form text
Assistance Interval Month Based
Regen Based
Valve System
Valve
Media Volume
Salt Dosage
BLFC size
Regen. Type
Capacity
Hardness
Reserve
Day Override
Regen Time
Volume Override
Regeneration Regen. Flow
Relay Outputs Aux 1/Aux 2
Meter Meter Type
Generic
Remote Regen Remote Regen
NOTE: Some items may not be shown depending on control configuration. The control will discard any changes and exit Master Settings if any button is not pressed for five minutes.
18 • FLECK 5800 XTR2 Service Manual
Values
English, French, Changes the language to display screen text and button labels in the control (available with international
German, Italian, version of control only).
Spanish, Dutch
U.S. Changes system units and values across all parameters in the control. All programmed units and values
Metric should be recalculated after adjusting this setting.
Grains per gallon Changes hardness units used in displaying hardness parameters and calculating system capacity and editing
mg/L or ppm exchange capacity and hardness settings. The hardness units setting is not available when regen. type; tank
German degrees sensor has been selected.
French degrees
English degrees
A - Z and space Name of service provider to display when viewing the Assistance screen. 20 character limit.
0 - 9 and space Phone number of service provider to display when viewing the Assistance screen. 20 character limit.
1 - 60 Set to automatically display the Assistance screen after a certain number of months or regenerations.
1 - 2000
Off
4 System 4 (single system) is currently the only available selection.
5800 Select the type of valve to be installed.
5810
5812
0.25 - 999.00 ft Used to calculate capacity.
1 - 9999 L
3 - 18 lbs/ft Used to calculate capacity and refill time.
50 - 290 g/L
0.125 gpm Brine Line Flow Control; Used to calculate refill time.
0.250 gpm
0.500 gpm
1.000 gpm
Time Clock Regeneration Types are described in detail on page 13.
Softener Immediate Additional Valve screen parameters are dependent upon selected Regeneration Type. Not all parameters will
Softener Delayed be displayed.
Sensor Softener Delayed Softener Delayed regeneration type has four reserve options (Fixed %, Fixed Volume, Variable Reserve, Weekly
Filter Immediate Reserve). The control will display additional configuration options depending on the selected reserve type.
Filter Delayed
1 - 99 999 999 Only required on metered systems to calculate treated water capacity and reserve. Represents total system
grains / grams / degrees capacity between regenerations.
1 - 199 grains/gallon Only required on metered systems to calculate treated water capacity and reserve. Represents hardness of
1 - 1 999 mg/liter untreated water. The hardness units setting is not available when regen. type; tank sensor has been selected.
x - x degrees
Fixed % Only available when Meter Delayed regeneration type is selected.
Fixed Volume Selecting Fixed % or Fixed Volume will display additional configuration options.
Weekly Reserve Weekly Reserve is calculated based on average day of week's water usage.
Variable Reserve Variable Reserve is calculated based on previous day's water usage.
1 - 99 days Available to be programmed for all Regeneration Types.
4, 8, 12, 16, 20 hours
12 / 24 hour clock Required for Time Clock and delayed Regeneration Types. Set for immediate regeneration types only when a
Day Override is also set.
1 - 99 999 999 gallons / liters Only displayed when Regeneration Type is Filter Immediate or Filter Delayed.
Upflow Cycle steps on the Home screen and during regeneration will change to reflect the cycle steps and order in
Downflow the selected Regenerant Flow.
Downflow 2x Backwash Additional Regeneration screen parameters are dependent upon selected Regenerant Flow. Not all
Filter parameters will be displayed.
Custom Upflow/Downflow/Filter Custom Upflow and Downflow allows for up to 20 programmable cycle steps.
Variable Refill Variable Refill calculates refill time based on Salt Dosage, Media Volume, and BLFC Size.
Time per cycle step can be programmed for all other Regenerant Flow options.
Cycle Based For Cycle Based relays, select the cycle steps on which the relays will turn on. For Time Based relays, two
Time Based start/end times will need to be selected for each relay. Relay times are based on total regeneration cycle time.
Volume Based Volume Based relays can be programmed from zero gallons/liters to the full system capacity. Duration can be
Alarm Based set from zero seconds to two hours. Volume Based option is not available when Regeneration Type is set to
Off Time Clock. Alarm Based relays will turn on when an alarm condition is met, and will turn off when the alarm
is cleared.
.75 inch Paddle Select the type of meter installed with the system. A Generic option is available if the installed meter does not
1.00 inch Paddle match any other selection. Selecting the Generic meter type requires setting the number of pulses per gallon
1.25 inch Turbine or liter to ensure proper metering.
1.50 inch Paddle
1.50 inch Turbine
2.00 inch Paddle
3.00 inch Paddle
Generic
1 - 999.9 /1 - 1500 Only available when Generic meter type is selected.
pulses per gallon / liter
1 - 255 seconds Select a value in seconds that the remote switch must be closed in order to trigger the regeneration.
Off
Notes
262.634.2386 | greatlakesintl.com