Pentair FLECK 5800 XTR2 Service Manual page 9

TOUCHSCREEN CONTROL FEATURES
TOUCHSCREEN CONTROL FEATURES
continued
continued
Screen Features
Screen Features
Home Screen
Home Screen
Day and Time
Day and Time
Regeneration
Regeneration Cycle Wheel
Cycle Wheel
Vacation
Vacation
Assistance
Assistance
Figure 11 Home Screen
Figure 11 Home Screen
The Home screen is always displayed unless the control
settings are being configured or during regeneration. This The Home screen is always displayed unless the control
screen displays general information about the system and settings are being configured or during regeneration. This
screen displays general information about the system and allows you to start a manual regeneration or access control
allows you to start a manual regeneration or access control settings. Features of the screen are described below, followed
settings. Features of the screen are described below, followed by more detailed information about each feature.
by more detailed information about each feature.
NOTE: If no button is pushed for five minutes, the screen will
NOTE: If no button is pushed for five minutes, the screen will enter a power save mode. The unit will continue to
enter a power save mode. The unit will continue to operate, but the screen will be blank. Touch anywhere
operate, but the screen will be blank. Touch anywhere on the screen to exit power save mode.
on the screen to exit power save mode.
• Regeneration: Press to start a manual regeneration.
• Regeneration: Press to start a manual regeneration.
• Settings: Press to access commonly used settings.
• Settings: Press to access commonly used settings.
• Diagnostics: Press to view diagnostic data.
• Diagnostics: Press to view diagnostic data.
• Assistance: Press to display the name and phone number
• Assistance: Press to display the name and phone number to call for service.
to call for service.
• Vacation Mode: Press to halt all scheduled regenerations;
• Vacation Mode: Press to halt all scheduled regenerations;
press again to resume normal operation.
press again to resume normal operation.
• Regeneration Cycle Wheel: Displays the cycle steps the
• Regeneration Cycle Wheel: Displays the cycle steps the
valve will step through during a regeneration.
valve will step through during a regeneration.
• Treatment: The unit is treating water
• Treatment: The unit is treating water
• Backwash: Water flows from the bottom of the vessel
• Backwash: Water flows from the bottom of the vessel
to the top of the vessel to clean the media
to the top of the vessel to clean the media
• Draw: Brine is drawn into the media and then slowly
• Draw: Brine is drawn into the media and then slowly rinsed out
rinsed out
• Rapid Rinse: Water flows from the top of the vessel to
• Rapid Rinse: Water flows from the top of the vessel to the bottom of the vessel to rinse the media
the bottom of the vessel to rinse the media
• Tank Refill: Brine tank is refilled with water
• Tank Refill: Brine tank is refilled with water
• Next Scheduled Regeneration: Displays the time to
• Next Scheduled Regeneration: Displays the time to next scheduled regeneration, or volume remaining until
regeneration in meter systems.
next scheduled regeneration, or volume remaining until
regeneration in meter systems.
9 • FLECK 5800 XTR2 Service Manual
9 • FLECK 5800 XTR2 Service Manual
Next Scheduled
Regeneration
Next Scheduled
Regeneration
Current Cycle
Current Cycle Step
Step
Diagnostics
Regeneration
Diagnostics
Settings
Regeneration
Settings
• Day and Time: Displays the currently programmed day of
• Day and Time: Displays the currently programmed day of the week and time. This button will flash if the control has
been reset.
the week and time. This button will flash if the control has
been reset.
Regeneration
Regeneration
Regenerate the system on demand by pressing the
Regenerate the system on demand by pressing the Regeneration button on the home screen. Manual Regeneration
Regeneration button on the home screen. Manual Regeneration can only be used while the valve is in the treatment position.
From the Home screen, press the Regeneration button
can only be used while the valve is in the treatment position.
Regeneration screen appears. From the Home screen, press the Regeneration button
Regeneration screen appears.
Figure 12 Regeneration Screen
Figure 12 Regeneration Screen
• Press now to begin a regeneration immediately, or
press at regen. time to queue the regeneration for the
• Press now to begin a regeneration immediately, or
programmed regeneration time (2:00 AM default for press at regen. time to queue the regeneration for the
softeners, 12:00 AM default for filters). Pressing at regen.
programmed regeneration time (2:00 AM default for
softeners, 12:00 AM default for filters). Pressing at regen. time again will cancel the manual regeneration.
time again will cancel the manual regeneration.
• During Regeneration, press the
• During Regeneration, press the advance to the next cycle step. Once in regeneration, the
volume or time will be displayed below the advance to the next cycle step. Once in regeneration, the
volume or time will be displayed below the
Day and Time
Day and Time
From the Home screen (Figure 11) press the Day and Time
button. The Day and Time screen (Figure 13) appears.
From the Home screen (Figure 11) press the Day and Time
button. The Day and Time screen (Figure 13) appears.
Day
Day
Month
Month
Hour
Hour
Minute
Minute
Figure 13 Day and Time Screen
Figure 13 Day and Time Screen
• Press the Day of Week, Hour, Minute, and AM/PM/HR
• Press the Day of Week, Hour, Minute, and AM/PM/HR
buttons to adjust the values to the correct day and time.
Setting the value of the AM/PM/HR button to HR changes
buttons to adjust the values to the correct day and time.
the display to a 24 hour clock. Press the Day, Month, and Setting the value of the AM/PM/HR button to HR changes
Year buttons to adjust the values to the correct date. the display to a 24 hour clock. Press the Day, Month, and
Year buttons to adjust the values to the correct date. Press the button when finished to return to the
Home screen.
Press the button when finished to return to the
Home screen.
262.634.2386 | greatlakesintl.com
. The
. The
Return
to Home Return
to Home Screen
Screen
button to immediately
button to immediately
button.
button.
Year
Year
Day of Week
Day of Week
AM/PM/HR
AM/PM/HR