Pentair FLECK 5800 XTR2 Service Manual page 11

TOUCHSCREEN CONTROL FEATURES
continued
TOUCHSCREEN CONTROL FEATURES
continued
The Password screen displays a numeric keypad.
The Password screen displays a numeric keypad.
Figure 17 Password Screen
• Enter the master settings password 1201 and press
Figure 17 Password Screen
continue to the main Master Settings screen, or press
• Enter the master settings password 1201 and press
to return to the Home screen.
continue to the main Master Settings screen, or press
After entering the correct password and pressing
to return to the Home screen.
Master Settings screen is displayed.
After entering the correct password and pressing
Master Settings screen is displayed.
Figure 18 Main Master Settings Screen
While in the Master Settings screens, press
Figure 18 Main Master Settings Screen
set parameters to a custom profile (see "NON FACTORY
While in the Master Settings screens, press
SETTINGS" on page 15) or press the Home button
set parameters to a custom profile (see "NON FACTORY
return to the Home screen.
SETTINGS" on page 15) or press the Home button
Features of the Master Settings screens are described
return to the Home screen.
below. See MASTER SETTINGS PROGRAMMING and MASTER
SETTINGS REFERENCE CHART for more detailed information.
Features of the Master Settings screens are described
below. See MASTER SETTINGS PROGRAMMING and MASTER • format: Contains settings for Language, Units, Hardness
SETTINGS REFERENCE CHART for more detailed information.
Units, Assistance Name, Assistance Phone, and
Assistance Interval. See TOUCHSCREEN CONTROL QUICK
• format: Contains settings for Language, Units, Hardness
START for more information about these settings.
Units, Assistance Name, Assistance Phone, and
• valve: Contains settings for System, Valve, and Assistance Interval. See TOUCHSCREEN CONTROL QUICK
START for more information about these settings.
Regeneration Type.
• valve: Contains settings for System, Valve, and
• regen: Contains settings for Regen Flow.
Regeneration Type.
• relay: Contains settings for Aux 1 and Aux 2 relays.
• regen: Contains settings for Regen Flow.
• meter: (time clock systems) Contains settings for Meter
• relay: Contains settings for Aux 1 and Aux 2 relays.
Types, emergency regeneration.
• meter: (time clock systems) Contains settings for Meter
• settings review: Displays a summary of all programmed
Types, emergency regeneration.
settings.
• settings review: Displays a summary of all programmed
settings.
11 • FLECK 5800 XTR2 Service Manual
11 • FLECK 5800 XTR2 Service Manual
Press the screen navigation arrow at the top right of the screen
to navigate to the secondary Master Settings screen.
Press the screen navigation arrow at the top right of the screen
to navigate to the secondary Master Settings screen.
• water saver regen: Contains settings for setting
to
regenerations to save water by reducing backwash and
rinse time on a particular interval
• water saver regen: Contains settings for setting
to
• remote regen: Contains settings for triggering a regenerations to save water by reducing backwash and
, the main rinse time on a particular interval
regeneration via a remote input
• remote regen: Contains settings for triggering a
• cl generation/low salt: (international version only)
, the main
regeneration via a remote input
Contains settings to trigger chlorine generator for the
control
• cl generation/low salt: (international version only)
Contains settings to trigger chlorine generator for the
Water Saver Regeneration
control
From the secondary Master Settings screen (Figure 19) press
Water Saver Regeneration
the water saver regen. button to display the Water Saver
From the secondary Master Settings screen (Figure 19) press
Regen screen (Figure 20).
the water saver regen. button to display the Water Saver
Regen screen (Figure 20).
to save all
to save all
to
to
• water saver regen: reduces backwash and rapid rinse
times on a particular interval. The reduced backwash
time is 50% less than the backwash time (rounded down
• water saver regen: reduces backwash and rapid rinse
to the nearest minute, e.g. if the backwash time is set to
times on a particular interval. The reduced backwash
10 minutes, enabling the water saver regen function will
time is 50% less than the backwash time (rounded down
reduce the backwash time to 5 minutes).The reduced
to the nearest minute, e.g. if the backwash time is set to
rapid rinse time is 66% less than the rapid rinse time
10 minutes, enabling the water saver regen function will
(rounded down to the nearest minute, e.g. if the rapid
reduce the backwash time to 5 minutes).The reduced
rinse time is set to 10 minutes, enabling the water
rapid rinse time is 66% less than the rapid rinse time
saver regen function will reduce the backwash time to 3
(rounded down to the nearest minute, e.g. if the rapid
minutes).
rinse time is set to 10 minutes, enabling the water
saver regen function will reduce the backwash time to 3
• range: 1-25 regenerations (for example, a setting of 3
minutes).
will produce 1 normal regeneration then 3 reduced water
saving regenerations).
• range: 1-25 regenerations (for example, a setting of 3
will produce 1 normal regeneration then 3 reduced water
saving regenerations).
Figure 19 Secondary Master Settings Screen
Figure 19 Secondary Master Settings Screen
Figure 20 Water Saver Regen Screen
Figure 20 Water Saver Regen Screen
262.634.2386 | greatlakesintl.com