Pentair FLECK 5800 XTR2 Service Manual page 13

MASTER SETTINGS PROGRAMMING
continued
MASTER SETTINGS PROGRAMMING
Valve Screen
continued
From the main Master Settings screen (Figure 18) press the
Valve Screen
valve button to display the Valve screen.
From the main Master Settings screen (Figure 18) press the
valve button to display the Valve screen.
Figure 24 Valve Screen
• system: Displays the system type. Type 4 (single system)
is currently the only available selection.
Figure 24 Valve Screen
• valve: Contains settings to select the valve model
• system: Displays the system type. Type 4 (single system)
installed with the control.
is currently the only available selection.
• regen type: Contains settings for the type of regeneration
• valve: Contains settings to select the valve model
to use for the system. Regeneration types are described
installed with the control.
in detail below.
• regen type: Contains settings for the type of regeneration
Regeneration Types
to use for the system. Regeneration types are described
in detail below.
The XTR2 control supports several different Regeneration
Types. The Regeneration Type defines the method of automatic
Regeneration Types
regeneration for the system. Each type is explained below.
The XTR2 control supports several different Regeneration
Time Clock
Types. The Regeneration Type defines the method of automatic
regeneration for the system. Each type is explained below.
Triggers a regeneration on a timed interval. The control will
initiate a regeneration cycle at the selected Regeneration Time
Time Clock
when the number of days since the last regeneration equals
Triggers a regeneration on a timed interval. The control will
the Day Override value. The Day Override can be set from 1 - 99
initiate a regeneration cycle at the selected Regeneration Time
days as well as partial day intervals of 4, 8, 12, 16 and 20 hours.
when the number of days since the last regeneration equals
Softener Immediate
the Day Override value. The Day Override can be set from 1 - 99
Measures water usage and regenerates the system as soon days as well as partial day intervals of 4, 8, 12, 16 and 20 hours.
as the calculated system capacity is depleted. The control
Softener Immediate
calculates the system capacity by dividing the unit capacity by
Measures water usage and regenerates the system as soon
the feed water hardness. Softener Immediate systems do not
as the calculated system capacity is depleted. The control
use a reserve volume. The control will also start a regeneration
calculates the system capacity by dividing the unit capacity by
cycle at the programmed regeneration time if a number of days
the feed water hardness. Softener Immediate systems do not
equal to the Day Override pass before water usage depletes
use a reserve volume. The control will also start a regeneration
the calculated system capacity. The Day Override parameter
cycle at the programmed regeneration time if a number of days
default is OFF, and REGEN TIME will be grayed out unless the
equal to the Day Override pass before water usage depletes
day override value has been modified.
the calculated system capacity. The Day Override parameter
When setting the system for softener immediate
default is OFF, and REGEN TIME will be grayed out unless the
CAUTION
regeneration, setting the capacity to a value lower
day override value has been modified.
than that of feed water hardness may cause the
When setting the system for softener immediate
system to constantly regenerate. If this occurs,
CAUTION
regeneration, setting the capacity to a value lower
disconnect the motor from the control and correct
than that of feed water hardness may cause the
the capacity and feed water hardness values in
system to constantly regenerate. If this occurs,
Master Settings.
disconnect the motor from the control and correct
Softener Delayed
the capacity and feed water hardness values in
Measures water usage and regenerates the system at the
Master Settings.
selected Regeneration Time after the calculated system
Softener Delayed
capacity is depleted. The control calculates the system capacity
Measures water usage and regenerates the system at the
by dividing the unit capacity by the feed water hardness and
selected Regeneration Time after the calculated system
subtracting the reserve.
capacity is depleted. The control calculates the system capacity
13 • FLECK 5800 XTR2 Service Manual
by dividing the unit capacity by the feed water hardness and
subtracting the reserve.
13 • FLECK 5800 XTR2 Service Manual
The reserve should be set to ensure that the system delivers
treated water between the time the system capacity is depleted
and the actual regeneration time. Reserves can be set at a
The reserve should be set to ensure that the system delivers
Fixed Volume, Fixed Percentage of capacity, a Variable Reserve
treated water between the time the system capacity is depleted
based on the previous calendar day's water usage, or a Weekly
and the actual regeneration time. Reserves can be set at a
Reserve based on the average water usage for the current day
Fixed Volume, Fixed Percentage of capacity, a Variable Reserve
of the week. The default for the day override parameter is OFF,
based on the previous calendar day's water usage, or a Weekly
and the default reserve type is Weekly Reserve.
Reserve based on the average water usage for the current day
A Softener Delayed control will also start a regeneration cycle
of the week. The default for the day override parameter is OFF,
at the selected Regeneration Time if a number of days equal
and the default reserve type is Weekly Reserve.
to the Day Override pass before water usage depletes the
A Softener Delayed control will also start a regeneration cycle
calculated system capacity.
at the selected Regeneration Time if a number of days equal
If the regen type is changed from Softener Immediate to
to the Day Override pass before water usage depletes the
Softener Delayed (or vice-versa), all parameters within those
calculated system capacity.
types will be reset to factory default.
If the regen type is changed from Softener Immediate to
Sensor Softener Delayed
Softener Delayed (or vice-versa), all parameters within those
Monitors the softener resin bed to determine when the system
types will be reset to factory default.
capacity is depleted (less reserve capacity) and regenerates
Sensor Softener Delayed
the system at the selected Regeneration Time. The reserve of
Monitors the softener resin bed to determine when the system
the system is below the bottom probe and should ensure that
capacity is depleted (less reserve capacity) and regenerates
the system delivers treated water between the time the sensor
the system at the selected Regeneration Time. The reserve of
detects hardness and the actual regeneration time.
the system is below the bottom probe and should ensure that
The default for the day override parameter is AUTO and
the system delivers treated water between the time the sensor
monitors the days used to ensure a regeneration based on the
detects hardness and the actual regeneration time.
average use.
The default for the day override parameter is AUTO and
Filter Immediate
monitors the days used to ensure a regeneration based on the
Regenerates the system immediately after the selected Volume
average use.
Override value is depleted. A Filter Immediate control will also
Filter Immediate
start a regeneration cycle at the selected Regeneration Time if
Regenerates the system immediately after the selected Volume
a number of days equal to the Day Override pass before water
Override value is depleted. A Filter Immediate control will also
usage depletes the calculated system capacity.
start a regeneration cycle at the selected Regeneration Time if
Filter Delayed
a number of days equal to the Day Override pass before water
usage depletes the calculated system capacity.
Regenerates the system at the selected Regeneration Time
after the selected Volume Override value is depleted. A Filter
Filter Delayed
Delayed control will also start a regeneration cycle at the
Regenerates the system at the selected Regeneration Time
selected Regeneration Time if a number of days equal to the
after the selected Volume Override value is depleted. A Filter
Day Override pass before water usage depletes the calculated
Delayed control will also start a regeneration cycle at the
system capacity.
selected Regeneration Time if a number of days equal to the
NOTE: If Filter Immediate or Filter Delayed are selected,
Day Override pass before water usage depletes the calculated
Regenerant Flow selections are limited to Filter,
system capacity.
Upflow Filter, Custom Filter, and Custom Upflow
NOTE: If Filter Immediate or Filter Delayed are selected,
Filter.
Regenerant Flow selections are limited to Filter,
Regeneration Screen
Upflow Filter, Custom Filter, and Custom Upflow
Filter.
From the main Master Settings screen (Figure 18) press the
Regeneration Screen
regen button to display the Regeneration screen.
From the main Master Settings screen (Figure 18) press the
regen button to display the Regeneration screen.
Figure 25 Regeneration Screen
Figure 25 Regeneration Screen
262.634.2386 | greatlakesintl.com