Pentair FLECK 5800 XTR2 Service Manual page 10

TOUCHSCREEN CONTROL FEATURES
continued
Settings
The Settings screen allows you to change basic control settings
including time of regeneration and water hardness. These
settings improve the operational efficiency of the system and
can be adjusted independently from other control settings
without needing to enter Master Settings.
From the Home screen, press the Settings button
Settings screen is displayed.
Brightness/Sound
Figure 14 Settings Screen
• Press day override to adjust the number of days since
last regeneration in which a new regeneration will
automatically be run whether one is scheduled or not.
• Press regen time to adjust the time of day that an
automatic regeneration cycle will begin.
• Press hardness to adjust the hardness setting. This value
should match the hardness of the incoming untreated
water supply.
NOTE: The hardness setting is not available when regen. type;
tank sensor has been selected
NOTE: Changing the hardness setting recalculates
treatment volume and regeneration interval. This
setting should only be changed on the advice of a
professional.
• Press to save your changes or press
the Home screen.
Additional features may be accessed from the Settings screen
by pressing the buttons at the bottom of the screen (Figure 14):
• Master Settings: Displays the Master Settings screen,
which allows you to fully program the valve.
• Brightness/Sound: Displays the Brightness/Sound
screen, which allows you to adjust the backlight of the
control screen and allows you to mute the alarms of the
control.
NOTE: Due to the complexity of these settings and the
potential for errors, Master Settings should only be
accessed by your local water professional.
NOTE: Settings can not be accessed during a regeneration.
If a regeneration starts while in the settings menu,
the screen will return to the main screen and all
parameters will be voided.
10 • FLECK 5800 XTR2 Service Manual
. The
Master Settings
to return to
User Assistance
The Assistance screen displays the name and phone number
that the homeowner may call for service of the unit. Press the
Assistance button from the Master Settings or Home
screens. The Assistance screen is displayed.
Figure 15 Assistance Screen
• This information is entered upon initial control startup
(see TOUCHSCREEN CONTROL QUICK START) or can be
changed in Master Settings.
• Press the Home button
NOTE: The Assistance screen is also displayed automatically
when the system reaches the programmed assistance
interval. See TOUCHSCREEN CONTROL QUICK START.
Master Settings
The Master Settings screens include all configurable
parameters available in the control.
Improperly adjusting master settings may cause
CAUTION
the system to operate incorrectly. Before entering
master settings please contact your professional
water dealer.
From the Settings screen, press the Settings button
A warning message appears.
Figure 16 Master Settings Warning Screen
• Press to continue to the Password screen or press
to return to the Home screen.
262.634.2386 | greatlakesintl.com
to return to the Home screen.
.