Initializing The Tpm 2.0 For Users; Control Panel; Removing The Left Control Panel - Dell PowerEdge HS5620 Installation And Service Manual

Initializing the TPM 2.0 for users

Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On.
4. Save the settings.
5. Restart your system.

Control panel

This is a service technician replaceable part only.

Removing the left control panel

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the air shroud.
4. If applicable, remove the drive backplane
5. Remove the cooling fan cage
Steps
1. Disconnect the control panel cable from the system board connector.
NOTE: Observe the routing of the cable as you remove it from the system.
2. Using the Phillips #1 screwdriver, remove the screws that secure the left control panel assembly to the system.
3. Hold the left control panel assembly and remove the control panel along with the cable from the system.
Figure 130. Removing the left control panel
Safety instructions.
Before working inside your
cover.
assembly.
system.
Installing and removing system components 163