Dell PowerEdge HS5620 Installation And Service Manual page 105

Table 76. Cable routing - 8 x 2.5-inch NVMe RAID with single, and dual processor configuration with rear
mounted fPERC (PERC11) (continued)
From
SYS_PWR2 (power connector on system board)
FAN_PWR (power connector on fan board)
SYS_PWR1 (power connector on system board)
Figure 67. Cabling diagram of configuration 8 - 8 x 2.5-inch NVMe backplane with dual processor configuration with
no PERC
Table 77. Cable routing - 8 x 2.5-inch NVMe backplane with dual processor configuration with no PERC
From
BP_DST_PA1 (signal connector on backplane)
BP_DST_PB1 (signal connector on backplane)
BP_DST_PA2 (signal connector on backplane)
BP_PWR_1 (power connector on backplane)
BP_DST_PB2 (signal connector on backplane)
To
CPU_PWR2 (power connector on PIB)
FAN_PWR1 (power connector on PIB)
SYS_PWR1_1 , SYS_PWR1_2 (power connectors on PIB)
To
SL5_CPU1_PA3 (signal connector on system board)
SL6_CPU1_PB3 (signal connector on system board)
SL1_CPU2_PA1 (signal connector on system board)
SIG_PWR1 (power connector on PIB)
SL2_CPU2_PB1 (signal connector on system board)
Installing and removing system components 105