Service Wheel (Optional) - CYBEX 525T Service Manual

• Failure to use a manufacturer approved repair technician may void any warranty claims.

Service Wheel (optional)

A service wheel lever is located at the rear end of the unit. This lever will engage a wheel and elevate
the rear end of the unit. The treadmill can then be easliy moved for cleaning or servicing.
Engage service wheel
1. Unplug power cord from power outlet.
2. Grasp the service wheel lever and slide to the right and down to lock in place.
The service wheel will lower and raise the rear feet off the floor.
3. Move treadmill as needed.
Disengage service wheel
Cybex 525T Treadmill Part Number
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Trip and fall hazard. To avoid injury, make sure service wheel lever is not
engaged prior to use.
Page 18 of 199
Item Description
1 Service wheel lever
2 Frame
Item Description
1 Service wheel
2 Rear feet
3 Floor
4 Service wheel lever
Qty.
1
1
Qty.
1
2
1
1