Service Wheel (Optional) - CYBEX 770T Owner's Manual

Pixels
Very small red, blue, white or green spots may be visible or may appear on the screen. This is a
characteristic of liquid crystal display panels and is not considered a defect for replacement. The
liquid crystal panel is built with very high precision technology giving fine picture details. Occasionally,
a few non-active pixels may appear on the screen as a fixed point. This does not affect the
performance of monitor or merit a warranty claim.
Maintenance
It is very important to have the unit regularly examined by a qualified technician to ensure the prod-
•
uct is fit for use.
If the unit malfunctions, please refer to a qualified technician for repair or replacement of defective
•
parts immediately. Do not attempt to use the monitor until it has been inspected and repaired by a
qualified technician.
For inspection, installation and servicing, please consult qualified technician.
•
Failure to use a manufacturer approved repair technician may void any warranty claims.
•

Service Wheel (optional)

A service wheel lever is located at the rear end of the unit. This lever will engage a wheel and elevate
the rear end of the unit. The treadmill can then be easliy moved for cleaning or servicing.
WARNING: Shock and electrocution hazard.
Unplug unit and let sit 10 minutes before cleaning or performing maintenance.
•
Electrical charge can remain in unit after unplugging.
•
Keep water and liquids away from electrical parts.
•
Engage service wheel
1. Unplug power cord from power outlet.
2. Grasp the service wheel lever and slide to the right and down to lock in place.
Cybex Owner's Manual
1
2
62
Service wheel lever
Frame