CYBEX 525T Service Manual page 166

Remove On/Off switch
Take notice of which cables are connected to the On/Off switch.
1. Disconnect the six fast-on connectors that connect to the On/Off switch.
2. Press in the sides of the On/Off switch to remove it from the base plate using a flat head screwdriver.
Install On/Off switch
Position On/Off switch as shown.
1. Insert the On/Off switch into the hole in the base plate.
Cybex 525T Treadmill Part Number
Item
Page 166 of 199
Description
1 To power inlet (White)
2 To power inlet (Black)
3 On/Off switch
4 To line filter (Black)
5 To power supply (Brown)
6 To power supply (Blue)
7 To line filter (White)
Position On/Off switch as
8
shown
Item Description
1 On/Off switch
2 Base plate
3 Side plate
Item Description
1 On/Off switch
2 Base plate
3 Side plate
Qty.
1
1
1
1
1
1
1
1
Qty.
1
1
1
Qty.
1
1
1