CYBEX 525T Service Manual page 139

Remove rear roller
1. Remove the two rear roller bolts, washers, bushings and rear roller nuts (one roller bolt on each
side) using a 3/4" Socket wrench.
Loosen each bolt evenly, making sure not to loosen either bolt too many turns before moving to the
other bolt.
2. Lift one side of the rear roller and slide the roller out of the running belt.
Remove front roller
1.
Loosen the left mounting bolt using a 9/16" Socket wrench.
2. Loosen the right mounting bolt using a 9/16" Socket wrench.
3. Remove the front roller and slide the drive belt off of the front roller.
Cybex 525T Treadmill Part Number
Moving parts hazard. To avoid serious injury slowly release tension to
parts.
Page 139 of 199
Item Description
1 Rear roller nut
2 Bushing
3 Washer
4 Bolt
5 Rear roller
Item Description
1 Front roller
2 Drive belt
3 Tensioning slot
4 Mounting bolt
Qty.
1
1
1
1
1
Qty.
1
1
1
1