CYBEX 525T Service Manual page 147

Loosen rear roller
Loosen the rear roller mounting bolts using a 3/4" Socket wrench.
Remove front roller
1.
Loosen the left mounting bolt using a 9/16" Socket wrench.
2. Loosen the right mounting bolt using a 9/16" Socket wrench.
3. Remove the front roller and slide the drive belt off of the front roller.
Remove drive belt
Remove the drive belt off of the drive motor pulley.
Install drive belt
Install the drive belt into the grooves on the drive motor pulley.
Install front roller
1. Slide the front roller into the running belt.
2. Slide the drive belt around the front roller before attaching the front roller.
Cybex 525T Treadmill Part Number
Moving parts hazard. To avoid serious injury slowly release tension to
parts.
Page 147 of 199
Item Description
1 Front roller
2 Drive belt
3 Tensioning slot
4 Mounting bolt
Item Description
1 Front roller
2 Drive belt
3 Tensioning slot
4 Mounting bolt
Qty.
1
1
1
1
Qty.
1
1
1
1