Service And Technical Data; Preventive Maintenance Schedule; Preventive Maintenance Tips - CYBEX V Series Assembly Instructions Manual

Hide thumbs Also See for V Series:

Assembly instructions manual (31 pages)

Owner's manual (23 pages)

Assembly instructions manual (23 pages)

Table Of Contents

Table of Contents

Preventive Maintenance Schedule

Item

Console Overlays

Bottle Holders / Accessory Trays

Console Mounting Bolts

Hardware

Frame

Plastic Covers

Lifepulse Sensors

Striding Belt Centered

Emergency Stop Magnet

Motor Cover

Motor Electronic Compartment

Drive Belt

Leg Levelers

Front and Rear Rollers

Side Step Area

Side Hand Rails

Ergo

™

Front Handlebar

Preventive Maintenance Tips

NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep the

equipment out of use until defective parts are repaired or replaced. Pay special attention to parts that are subject to wear, as outlined

below.

The following preventive maintenance tips will keep the product operating at peak performance:

•

Locate the product in a cool, dry place.

•

Clean the display console and all exterior surfaces with an approved or compatible cleaner (see Approved and Compatible

Cleaners) and a microfiber cloth.

•

Long fingernails may damage or scratch the surface of the console; use the pad of the finger to press the selection buttons on the

console.

•

Check operation of the emergency stop system once a week.

•

Inspect and vacuum the area directly surrounding and under the unit regularly.

•

Vacuum around the striding belt regularly to keep debris from accumulating.

•

Inspect exterior parts regularly for wear, particularly the striding belt, deck and line cord.

•

Check to make sure the unit is properly leveled.

•

Check the position (centering) of the striding belt.

NOTE: Normal belt operating position is for the belt to be located within the belt travel indicators on the rear roller guards. Refer to

Tracking (Centering) A Striding Belt or contact Customer Support Services for proper alignment instructions.