Remove motor cover
1. Loosen, but do not remove the two front cover screws securing the motor cover using a Phillips
screwdriver.
2. Remove motor cover by carefully lifting vertically. Do not break the four plastic connectors.
Remove shield
1. Loosen, but do not remove the seven screws securing the shield to the base using a Phillips
screwdriver.
2. Remove shield by sliding sideways and then vertically off of base.
Cybex 525T Treadmill Part Number
Item
Page 172 of 199
Description
1
Motor Cover
2
Front Cover
3
Screws
4
Plastic Connectors
Item
Description
1
Base
2
Screws
3
Shield
Qty.
1
1
2
4
Qty.
1
7
1