CYBEX 525T Service Manual page 47

Auto Program (ATSC Monitor)
1.
Press to select Auto Program.
2.
Press to enter the menu.
3.
Press or
ATSC Monitor
4.
Press or
a) Analog Only (Default): TV searches for analog channels only.
b) Digital Only: TV searches for digital channels only.
c) Analog and Digital: TV searches for both analog and digital channels.
5.
Press to select Channel Sequence.
6.
Press or
a) Interleave A+D: In the order of channel number regardless of the system.
b) All A then D: Digital channels are displayed after all analog channels.
7.
Press or
Not available when Mode is set to Analog Only.
8.
Press or
Choices are: None, Air, Cable STD, Cable IRC, or Cable HRC.
Cybex 525T Treadmill Part Number
to select Mode.
to set the scope of channel scanning.
to set the Channel Sequence in which the channels are displayed after searching.
to select Additional Digital Signal.
to choose the Additional Digital Signal source.
Additional Digital Signal
Page 47 of 199
Mode
Channel Sequence
Channel Map