Series 50 Compatibility Commands - TransAct Ithaca 90PLUS Series Programmer's Manual

Programmer's Guide

5.14 Series 50 Compatibility Commands

To allow the Series 90PLUS Printer to replace the Series 50 Printer without effecting the Series 50's
application, several special Series 50 commands are available in the Series 90PLUS Printer as 50 extensions.
Because these commands can have effects that Series 90PLUS applications may not want, these commands must
be enabled.
To make the 50 commands operational, enable the 50 extensions in the configuration menu.
Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Description
11/07/05
PcOS Series 90PLUS
Extended Series 50 cash drawer commands
[BS]
08H
<8>
The [BS] command opens Cash Drawer 1.
Extended Series 50 cash drawer commands
[BEL]
07H
<7>
The [BEL] command opens Cash Drawer 2.
Extended Series 50 cash drawer commands
[ESC] +
1BH 2BH
<27> <43>
The [ESC] + command opens Cash Drawer 1.
Extended Series 50 pass-through
[ESC] # or [ESC] d or [ESC] [RS] and [ESC] "
1BH 23H or 1BH 64H or 1BH 1EH and 1BH 22H
<27> <35> or <27> <100> or <27> <30> and <27> <34>
[ESC] # or [ESC] d turn on pass-through, and [ESC] [RS] or [ESC] " turn off pass-
through. This command requires that the pass-through function be enabled in the
configuration menu.
Rev Q
Printer Control Codes
Series 50 Compatibility
Page 79