Slip Sensor; Figure 4 Slip Form Size; Figure 5 Slip Paper Print - TransAct Ithaca 90PLUS Series Programmer's Manual

General Specifications

Figure 4 Slip form size

3.5 Slip Sensor

Once an inserted form has been properly aligned and sensed by the slip sensor, it is positioned at the top of the
form by the slip load command.

Figure 5 Slip paper print

The position of the first line of print can be adjusted by 0.050 inch ( 1.27 mm) during printer installation.
Page 10
PcOS Series 90PLUS
2.50 - 9.00"
(63.5 - 228.6 mm)
Rev Q
Programmer's Guide
3.375 - 11.00"
(85.7 - 279.4 mm)
11/07/05