Change History - TransAct Ithaca 90PLUS Series Programmer's Manual

Programmer's Guide

Change History

Rev Q
Added Las Vegas Address
Rev P
Removed ASB. ASB is now a special order option.
Rev O Skipped
Rev. N
Updated disclaimer
Rev. M
Updated bookmarks in the Code Summary Table
Added Section 3.6.2.2 and Table 4
Updated MICR section
Added Euro Character on page 33
Corrected Cash Drawer Command on page 72
Updated "Service Information" section
Updated "Contacting Ithaca Peripherals" section
Rev. L
Clarified cash drawer connectors on page 144
Changed IEEE-1284 to IEEE 1284 and Code 3 of 9 to Code 39
Rev. K
Reformatted entire document
Corrected miscellaneous grammar and spelling mistakes
Rev. J Update for Firmware Rev. 2.24
Corrected Epson documentation
Added documentation for justified bar codes and readable printing of bar codes
Added documentation for Bar code 93
Rev. I Update for Firmware Rev. 2.21
Corrected documentation for ENQ 15, 17, and 20 commands; length was 40H changed to 40 decimal
Added [ESC] z (&%FR) from release commands
Added features to graphic-save
Added OCR overlay features
Corrected miscellaneous grammar and spelling mistakes
Rev. H Update for Firmware Rev. 2.15
Improved description of pass-through and multidrop
Added features to [ESC]a command
Added 90PLUS
Removed references to Ithaca Peripherals
Corrected description of Mechanical Test Mode
Updated several graphic examples
Rev. G Update for Firmware Rev. 2.13
Added narrow, 2.4 inch print zone
Added [ESC]mP, [ESC]q<n>, and [ENQ]<17> commands
Changed documentation on [ENQ] commands to reflect that they are no longer buffered
Documented Epson cash drawer option
Fixed right margin specifications
Rev. F Update for Firmware Rev. 2.11
Added functionality to the RESET commands
Enabled [DLE][ENQ] <3> EPOS
Added M50 extension commands
Added 270 rotated font and 5 x 7 fonts to [ESC]P commands
Changed IPCL command &%CC to accept 3 decimal digits, was 2 decimal digits
11/07/05
PcOS Series 90PLUS
Rev Q
Change History
Page i