Table of Contents
Advertisement
1. Access User interface 2 and press the Work step by step
2. Press Push button 1 and watch the damping during the individual
3. Set the end positions (1) and (2) so that the outer frame moves gently
7.2 Setting the adjusting wheels on the inner frame
The inner frame is elastically linked to its support at three points. The vac-
uum field below the inner frame sucks the middle slide so that it can be
pulled up into the folding position.
Important
A safety plate has been installed to protect against injury and prevent in-
advertent adjustments. It must be removed prior to any work on the inner
frame.
Fig. 87: Setting the adjusting wheels on the inner frame
(1) - Screw
(2) - Safety plate
To remove the safety plate:
1. Loosen screws (1) and (3).
2. Remove the safety plate (2).
114
steps of the cylinder.
into the end positions.
①
②
(3) - Screw
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
Edge folding device
button.
③
Advertisement
Table of Contents
