Table of Contents
Advertisement
Maintenance
10.2 Lubricating (806N-121-10)
For lubricating the machine, use only lubricating oil DA 10 or oil of equiv-
alent quality with the following specifications:
DA 10 can be obtained from DÜRKOPP ADLER GmbH sales offices using
the following part number:
Container
250 ml
1 l
2 l
5 l
Service Instructions 806N-111-10/806N-121-10 - 00.0 - 09/2023
WARNING
Risk of injuries from contact with oil!
Contact with oil can cause irritation, rashes,
allergies or skin injuries.
ALWAYS avoid long-term contact with oil.
ALWAYS thoroughly wash the affected areas if
skin contact with oil occurs.
CAUTION
Risk of environmental damage from old oil!
Incorrect handling of old oil can result in severe
environmental damage.
ALWAYS observe the legally prescribed
regulations for handling and disposal of mineral oil.
Take care to ensure that oil is NEVER spilled.
• Viscosity at 40° C: 10 mm
• Flash point: 150° C
Part number
9047 000011
9047 000012
9047 000013
9047 000014
2
/s
169
Advertisement
Table of Contents
