Copying Equalizer Data; Saving Equalizer Data; Reading Equalizer Data - Kenwood TS-890S Instruction Manual

Copying Equalizer Data

The customized equalizer characteristics can be copied to one of
the options from "User 1" to "User 3".
1 Press and hold F [RX EQ] to display the RX
Equalizer configuration screen.
2 Press F2[ ] / F3[
save.
• Pressing F4 [ADJ] on the RX Equalizer screen displays the RX
Equalizer Adjustment screen. Equalizer data can be copied from
either the RX Equalizer screen or RX Equalizer Adjustment screen.
3 Press F5 [COPY].
A message appears prompting you to confirm the destination
to copy the equalizer characteristics.
• Pressing F7 [CANCEL] ends the equalizer data copy
operation without copying and restores the display to the RX
Equalizer screen or RX Equalizer Adjustment screen.
.
4 Press F2 [USER 1], F3 [USER 2] or F4 [USER 3] to
specify the destination to copy the data to.
The equalizer selected in step 2 is copied to "USER 1", "USER
2" or "USER 3".
• After copy is complete, the message to confirm the
destination for copying the equalizer characteristics
disappears and the display is restored to the RX equalizer
screen or RX equalizer adjustment screen.
5 Press and hold F [RX EQ] or press [ESC] to end the
process.

Saving Equalizer Data

Multiple sets of customized DSP equalizer settings data can be
created and saved.
• Before doing so, configure the destination for saving the data in
"File Storage Location" of the
"Internal Memory" or "USB Flash Drive". (See 11-2)
• To save the data to a USB flash drive, insert a USB flash drive
formatted using this transceiver into
1 Press and hold F [RX EQ] to display the RX
Equalizer configuration screen.
2 Press F2[
] / F3[
save.
3 Press F7 [SAVE].
A message indicating that saving is complete is displayed.
.
] to select the equalizer to
"USB/File Management Menu" to
(USB-A).
] to select the equalizer to
COMMUNICATING AIDS 5
4 Press F4 [OK].
5 Press and hold F [RX EQ] or press [ESC] to end the
process.
The saved file is named in the "yyyymmdd_hhmmss"
●
format. The extension of the saved file is "equ".
(Example) If the date is 10:20:30 a.m., February 15, 2018:
20180215_102030.equ
The name of the destination folder is as follows. (The
●
name varies depending on the destination for saving
files.)
• USB flash drive: "KENWOOD\TS-890\SETTINGS
\RX_EQ"
• Built-in memory: "SETTINGS\RX_EQ"
When removing the USB flash drive, make sure to
●
execute "Safely Removing the USB Flash
(11-6).

Reading Equalizer Data

RX DSP equalizer data that is saved in the internal memory or USB
flash drive can be read.
• To read the data from a USB flash drive, insert the USB flash
drive containing the RX equalizer data into
1 Press and hold F [RX EQ] to display the RX
Equalizer configuration screen.
2 Press F2[
]/ F3[
read.
3 Press F6 [READ] to display the screen for selecting
the file to read.
.
4 Select the file to read.
• To read data from the internal memory, press F7 [INT.MEM].
• To read data from the USB flash drive, press F7
[USB.MEM]. (If a USB flash drive is not connected, a message
screen will appear prompting you to get ready the USB flash
drive.)
• Pressing F5 [NAME] allows the file name to be changed.
• Pressing F6 [DELETE] displays a message to confirm
deletion of the file. Pressing F4 [OK] deletes the file.
5 Press F2[ ]/ F3[
data file to read.
Alternatively, the RX equalizer data file can also be selected by
turning the [MULTI/CH] control.
6 Press F4 [OK].
• After the RX equalizer data has been read successfully, a
message indicating that reading is complete is displayed.
7 Press F4 [OK] again.
8 Press and hold F [RX EQ] or press [ESC] to end the
process.
Drive"
(USB-A).
] to select the equalizer to
] to select the RX equalizer
5-5