Safely Removing The Usb Flash Drive - Kenwood TS-890S Instruction Manual

11 USB/FILE MANAGEMENT
3 Press F2 [
]/ F3 [
USB Flash Drive".
4 Press F4 [SELECT].
A screen for selecting the files to copy is displayed.
.
5 Press F2[ ] or F3[
control to select the items to copy.
6 Press F5 [
] to select the checkbox to the left
of the settings data name.
• Pressing F5 [
are not copied.)
• Pressing F6 [CLR.ALL] deselects all the checkboxes.
• The items that can be copied are the same as those in the
table in "Copying Files to a
7 Press F4 [OK].
Copy starts and a copy in progress screen is displayed.
After file copying is complete, a confirmation screen on the
batch deletion of files is displayed.
Items for which the checkboxes are selected on the screen for
selecting the files to copy can be deleted from the built-in memory.
• Pressing and holding F4 [(DELETE)] executes the file
deletion operation.
• Pressing F7 [KEEP] leaves the files intact and returns the
display to the USB/File Management menu screen.
8 Press [ESC] to end the process.
If the number of files exceeds 255 while copy is in
●
progress, the copy operation stops.
When removing the USB flash drive, make sure to execute
●
"Safely Removing the USB Flash
If the same file on the source location is also found in the
●
destination USB flash drive, the latter file will be overwritten.
If there is insufficient memory in the USB flash drive for
●
all the files to be copied, pressing F4 [OK] will result in
an error and "Insufficient Memory Size" will be displayed
on the screen.
Pressing F7 [CANCEL] while copying is in progress
●
starts the cancel copy operation. When the cancel copy
operation is complete, the display returns to the USB/File
Management menu screen.
While manual recording or CW/RTTY/PSK
●
communication log recording is in progress, selecting a
file to copy followed by pressing F4 [OK] will result in an
error and an "unable to copy" message will be displayed.
When a remote user is logged in via the KNS function
●
and the communication log is set to ON, selecting "KNS
Log Files" and pressing F4 [OK] will result in an error and
an "unable to copy" message will be displayed.
11-6
] to select "Copy Files to
], or turn the [MULTI/CH]
] again deselects the checkbox. (Files
PC". Select at least 1 item.
Drive" (11-6).

Safely Removing the USB Flash Drive

When removing a USB flash drive from this transceiver, make sure
to follow the steps below to remove the device safely. Failure to do
so may result in the damage of the USB flash drive, settings data
files and audio data files or malfunction of this transceiver.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
• If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3 Press F2 [
]/ F3 [
USB Flash Drive".
4 Press F4 [SELECT].
A message on the safe removal of the USB flash drive is displayed.
.
• Pressing F7 [CANCEL] ends the operation without
performing the safe removal of the USB flash drive.
5 Press F4 [OK].
Safe removal starts.
.
.
6 Press F4[OK].
The USB flash drive can now be removed.
7 Press [ESC] to end the process.
] to select "Safe Removal of