Storing Data In Simplex Channels; Storing Data In Split Channels - Kenwood TH-235A Instruction Manual

144 mhz fm transceiver

Hide thumbs Also See for TH-235A:

Table of Contents

STORING DATA IN SIMPLEX CHANNELS

Select the desired frequency and related data (Tone,

CTCSS, DTSS, etc.) using VFO mode or Memory

Recall {page 19}.

Press [F].

Amemory channel! number and an arrow appear.

Turn the Tuning control to select the desired memory

channel.

Blinking " 4."

indicates that the channel contains no data.

Press [MR].

The selected frequency and related data are stored in the

memory channel. The transmit frequency from a split

memory channel is not stored.

if the memory channel selected in the previous step

already contained data, the new data overwrites the

previous data.

STORING DATA IN SPLIT CHANNELS

To select the desired receive frequency and related

data, use steps 1 to 4 given for Simplex Memory

Channels.

Select the desired transmit frequency.

Press [F].

Press [PTT]+[MR].

Table of Contents

Th-235e