Using The Memory; Microprocessor Memory Backup; Entering Memory Data - Kenwood TH-28A Instruction Manual

USING THE MEMORY
1 Microprocessor Memory Backup
All memory channel data, CALL channel data, DTSS
codes, message memory, last channel memory data,
and VFO data is backed up in EEPROM. It is not lost
unless you reset the memory.
All other data that you set is retained by a secondary
lithium battery, that will provide memory backup for
about 20 days if you remove the battery pack or
external DC power.
A fully discharged battery will require apploximately
10 hours to reach full charge after installing a NiCd
battery pack or external power.
2 Entering Memory Data
Entering memory data is a simple operation requiring
just a few keystrokes to store all the data you
require.
Entering Normal Channels
Use the numeric keypad to select the desired
receive frequency, offset, and any other information
you desire. If the desired frequency is already on
the display, continue to step 2.
qe {a rm het ee
: atin
wr Od
4 Press the MR key.
Clearing a Memory Channel
Select the memory channel to be cleared.
17