Kenwood TS-890S Instruction Manual page 23

Key
[ M.IN] Press
[<Q-M.IN] Press
.
Press
[Q-MR>]
Press and
hold
[ ] Press
[MENU] Press
[TF-SET] Press
.
Press
[MONI]
Press and
hold
.
[CAR] Press
Press
[AGC]
Press and
hold
Press
[NR]
Press and
hold
Press
.
[NB1]
Press and
hold
Press
[NB2]
Press and
hold
[BC] Press
Press
[NCH]
Press and
.
hold
Press
[RIT]
Press and
hold
Press
.
[XIT]
Press and
hold
[CL] Press
Displays the memory channel list screen.
Registers a memory channel.
Switches the menu mode item.
Registers a quick memory channel.
Confirms the content selected in menu mode.
Calls up a quick memory channel.
The parameter setting in the menu mode can now be changed.
Deletes all quick memory channels.
Switches the menu mode item.
Turns ON/OFF the menu mode.
Turns ON/OFF TF-SET. (ON while it is being pressed.)
Turns ON/OFF the TX monitor function.
Displays the TX monitor level configuration screen.
Displays or closes the carrier level configuration screen.
Switches the AGC time constant [FAST, MID, SLOW].
Displays or closes the AGC configuration screen.
Switches the mode of the noise reduction function [OFF/NR1/NR2].
Displays the NR1 configuration screen. (When Noise Reduction 1 is ON)
Displays the NR2 configuration screen. (When Noise Reduction 2 is ON)
Turns ON/OFF the Noise Blanker 1.
Displays the NB1 configuration screen.
Turns ON/OFF the Noise Blanker 2.
Displays the NB2 configuration screen.
Switches the mode of the beat canceler function [OFF/BC1/BC2].
Turns ON/OFF the notch filter.
Switches the bandwidth of the notch filter [Normal, Middle, Wide].
Turns ON/OFF the RIT function.
Shifts the RX frequency via RIT.
Turns ON/OFF the XIT function.
Shifts the TX frequency via XIT.
Clears the RIT or RIT/XIT frequency.
NAMES AND FUNCTIONS OF PARTS 2
Behavior Refer to
9-2
9-2
3-1
9-5
3-1
9-5
3-1
9-5
3-1
3-1
5-2
8-3
8-3
5-8
5-3
5-3
6-8
6-9
6-6
6-6
6-6
6-7
6-9
6-8
6-8
5-7
5-7
5-7
5-7
5-7
2-3