Usb/File Management Menu; Configuring The Destination For Saving Files; Saving Settings Data - Kenwood TS-890S Instruction Manual

11 USB/FILE MANAGEMENT

USB/File Management Menu

Configuring the Destination for Saving Files

Follow the steps below to select the destination for saving files
such as the transceiver data and audio recordings.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
• If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
.
3 Press F2 [
]/ F3 [
Location".
4 Press F4 [SELECT].
5 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to select the destination for saving the files.
Setting Value Internal Memory (default)/ USB Flash Drive
Internal Memory: Saves files to the built-in memory of the
transceiver.
USB Flash Drive: Saves files to a USB flash drive.
6 Press [ESC] to end the process.
The destination for saving files cannot be changed while
●
manual recording or CW/RTTY/PSK communication log
recording is in progress. Pressing F4 [SELECT] in this
case displays a "File destination change error" on the
screen.
11-2
] to select "File Storage

Saving Settings Data

Settings data or audio data created using this transceiver can also
be written to the built-in memory or a USB flash drive.
• To save the data to a USB flash drive, insert a USB flash drive
formatted using this transceiver into
• << >> starts to blink when a USB flash drive is connected,
and << >> lights up when the USB flash drive is recognized
by this transceiver.
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
• If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3 Press F2 [
]/ F3 [
Configuration Data".
4 Press F4 [SELECT].
File saving starts.
• While file saving is in progress, a "processing" screen is
displayed on the screen. (This is not displayed if the duration
of the saving process is very short.)
5 When the "data saving complete screen" is
displayed, press F4 [OK].
6 Press [ESC] to end the process.
The settings data contains the data of all settings that are
●
currently configured on this transceiver. However, the
following are excluded.
• Data that are stored in the operating environment
(CONFIG A or B) that is not currently selected.
• Screen capture image files
• Audio data files of manual recordings, full-time
recordings and timer recordings
• Settings data files of TX and RX equalizers
• CW/TTY/PSK communication log files
• KNS communication log files
• Image files for screen savers (Type 3)
The destination folder cannot be selected.
●
• USB flash drive: "\KENWOOD\TS-890\SETTINGS
\DATA"
• Built-in memory: "\SETTINGS\DATA"
The extension of the saved file is "dat".
●
The saved file is assigned with a name using the date
●
and time in the following format:
"yyyymmdd_hhmmss.dat".
(Example)
●
• 20180215_102030.dat (File that is saved on February
15, 2018, 10:20:30 a.m.)
To save files to a USB flash drive, check the following in
●
advance.
• The USB flash drive is formatted by this transceiver.
• The USB flash drive is correctly inserted into this
transceiver.
• There is sufficient free space on the USB flash drive.
• The USB flash drive is not write-protected or the file
system is not corrupted.
If there is insufficient memory, "Insufficient Memory Size"
●
is displayed on the screen.
If the USB flash drive is removed while files are being
●
saved to it, "Saving to USB flash drive unsuccessful" is
displayed on the screen.
If the USB flash drive for saving files to is write-protected,
●
"Insufficient Memory Size" is displayed on the screen.
(USB-A).
] to select "Save