Kenwood TS-890S Instruction Manual page 145

Screen
When screen is displayed or
when [VOICE1] is pressed
CW communication
Contest number decrement
Scope range configuration in When screen is displayed or
Fixed mode when [VOICE1] is pressed
TX output power limiter OFF When screen is displayed or
confirmation when [VOICE1] is pressed
When screen is displayed or
when [VOICE1] is pressed
When the position to configure
Dimmer configuration is selected
(When F3 [
pressed)
Altering of value
When screen is displayed or
when [VOICE1] is pressed
Band selection
Linear amplifier ON/OFF
Linear amplifier TX control
Linear amplifier TX delay
Linear amplifier menu ON/OFF
configuration
Linear amplifier TX delay time
(CW/FSK/PSK)
Linear amplifier TX delay time
(SSB/AM/FM)
Linear amplifier relay control
Linear amplifier external ALC
voltage
When screen is displayed or
KNS information
when [VOICE1] is pressed
When screen is displayed or
KNS configuration when [VOICE1] is pressed
When a selection is made
When screen is displayed or
when [VOICE1] is pressed
KNS Users List
When a selection is made
When screen is displayed or
when [VOICE1] is pressed
KNS user registration When a selection is made
Switching between check and
uncheck
When screen is displayed or
when [VOICE1] is pressed
Frequency marker list
When a selection is made
Calling up the preconfigured When screen is displayed or
emergency frequency when [VOICE1] is pressed
Confirmation for batch When screen is displayed or
deletion of files when [VOICE1] is pressed
When screen is displayed or
File deletion confirmation
when [VOICE1] is pressed
For more details on the option numbers when configuring the PF keys, please refer to
●
(16-3). When the higher order digit of the menu number or memory channel number is "0", "0" will also be uttered.
When the setting screen overlaps with messages on errors, warnings and other information, announcement will be output for
●
the error, warning or information message.
Frequency value in the VFO mode is announced in sequence starting from the highest order digit that is being displayed.
●
"Point" is uttered as a delimiter for MHz.
Operation/Status
"CW" + "Communication"
Subtracted contest number
"Bandscope" + "Configuration"
"TX power" + "Limit" + "Off" + "Are you Sure?"
"D" + "Menu" + Value (0 to 100)
* D: Dimmer
[D/L] + Value
*D: Display/ L: LED
]/ F4 [ ] is
Value
"Linear Amplifier" + Target bands of linear amplifier menu + Function name of focusing
position + Setting
[HF/ 50/ 70 (E type only)] + "Mega Hertz"
[Off/On]
[Low/ High]
[Off/ On]
[5/ 10/ 15/ 20/ 25/ 30/ 35/ 40]
[5/ 10/ 15/ 20/ 25/ 30/ 35/ 40/ 45/ 50]
[Off/ On]
[-1/ -2/ -3/ -4/ -5/ -6/ -7/ -8/ -9/ -10/ -11/ -12]
"KNS" + "Connect" + [Off / User name]
"KNS" + "Configuration" + Item number (from 1 digit) + Settings
"KNS" + "User" + "List" + User name of selected item*
User name of selected item*
* The registered user name is uttered one character at a time. Characters that cannot
be uttered will be inserted with a pause. Blank is uttered if a user name is not registered.
"KNS" + "User" + "List" + User name of selected item*
Name of selected item*
* The content of the announcement for the item name is as follows.
"User Name": "User"
"Password": "PASS" (utters 1 character at a time)
"Description" ： "D"
"RX Only": "RX" + [Off/ On]
"Disabled": "Disable" + [Off/ On]
[Off/ On]
"Frequency" + "Marker" + "List" + [ON/OFF] + [Blank / Frequency]
* "Blank" if no data is registered. Frequency when data is registered.
[Blank / Marker + Frequency]
"Emergency" + "Frequency"
"All" + "Delete" + "Are you sure?"
"Delete" + "Are you sure?"
VOICE GUIDANCE 13
Content of Announcement
"List of Assignable
*
Functions"
13-11