Preparation; Installing/ Removing The (Optional) Battery Pack - Kenwood NX-3220E2 User Manual

INSTALLING/ REMOVING THE (OPTIONAL) BATTERY
PACK
CAUTION
Do not short the battery terminals or dispose of the battery by fire.
●
Never attempt to remove the casing from the battery pack.
●
Install the battery pack after cleaning the battery pack contacts and
●
the transceiver terminals.
Before charging a battery pack that is attached to the transceiver,
●
ensure that the safety catch is firmly closed.
If the release latch is tilted and the battery
●
pack is not attached to the transceiver,
return the release latch to its original
position using your finger.
1 Match the guides of the battery pack with the corresponding
grooves on the upper rear of the transceiver, then firmly press
the battery pack to lock it in place.
2 Lock the safety catch to prevent accidentally pressing the
release latch and removing the battery pack.
3 To remove the battery pack, lift the safety catch, press the
release latch, then pull the battery pack away from the
transceiver.
14

PREPARATION

1
2
3
Release latch
Release latch
Safety catch