Basic Features; Arm Your System In Away Mode - Interlogix zerowire User Manual

Basic Features

Arm your system in Away Mode

Protect your property using Away Mode when you are leaving the premises.
Normally zones must be secure before you can arm in Away Mode, this will be indicated
by the Ready Light being lit a solid green.
If the Ready Light is flashing green then "forced arming" is enabled. This means some
zones are not secure but you can still arm your security system. Read more about the
Forced Arming Feature on the next page.
If the Status Key is not green press the Status Key to hear what zones are not secured.
You may arm your system using your user PIN code:
1.
2.
3.
4.
To silence the Exit Delay beeping, press the Away Key again and the beeping will stop.
This can also be performed from the UltraConnect app.
4
Ready Light
is green
READY STATUS
AWAY
USER PIN CODE ENTER
EXIT DELAY BEEPS
Touch
Away
All partitions
now protected
Check ready key is green.
Check status key is green.
Select the Away Mode.
Leave the premises.
ZeroWire User Manual