Adjusting Head Array - Invacare TDX SP2 Series User Manual

1. Loosen screws A.
2. Position remote on nucleus.
3. Tighten screws.
• 4 mm Allen key
• 8 mm wrench
1. Loosen screw A (not shown in picture).
2. Rotate remote in clamp to desired position.
3. Tighten screw.
ASL Components on Nucleus Tray
• 3/16 inch Allen key
1578997-J
Fig. 5-11
Fig. 5-12
Fig. 5-13 Graphic serves as an example.
1. Loosen screw A.
2. Position joystick on nucleus.
3. Tighten screw.
ASL Components on Nucleus Only
• 5/32 inch Allen key
Fig. 5-14 Graphic serves as an example.
1. Loosen screw A.
2. Position joystick on nucleus.
3. Tighten screw.

5.6 Adjusting Head Array

Adjusting Pad Position
• 5/32 inch Allen key
Setup
39