1. Loosen bottom backrest screws A on both sides.
Do not remove screws A.
2. Adjust component to desired position.
You can adjust seat depth steplessly. Use scale B on
seat as a guide.
Ensure that same seat depth is set on both sides.
3. Tighten screws.
5.11 Adjustment options for Max seat
5.11.1 Changing the armrest position
Tools:
•
6 mm Allen key
1578997-J
Fig. 5-33
1. Loosen the screws (1) and remove them.
2. Position the armrest as desired.
If you cannot move the armrest, hit the clamping jaw
slightly to loosen it.
3. Reposition the screws and tighten.
5.11.2 Setting height of armrests
•
3 mm Allen key
1. Loosen screw A.
2. Adjust armrest to desired height.
3. Re-tighten screw.
Setup
53