Setting The End Stop Of The Footrest - Invacare TDX SP2 Series User Manual

3.
Loosen the screw (1) using the Allen key.
4. Set the desired angle.
5. Re-tighten the screw.

5.20.3 Setting the end stop of the footrest

• 6 mm Allen key
• 10 mm wrench
1578997-J
1.
The end position of the footrest is determined by means
of a rubber stop (1).
2.
The rubber stop can be screwed in or out (A) or pushed
up or down (B).
Fig. 5-58
Fig. 5-59
Setup
73