Using Klickfix Adapter - Invacare TDX SP2 Series User Manual

Invacare® TDX® SP2 Series
1. Open upper hook-and-loop fastener.
2. Place lower end of the walking cane or crutches in
container at bottom.
3. Walking cane or crutches can be secured at upper end
using hook-and-loop fastener.

4.3 Using KLICKfix Adapter

Your mobility device can be fitted with the mini-adapter
from the Rixen + Kaul KLICKfix system. To this you can attach
various accessories such as the cellphone case supplied by
Invacare, which you can use to transport your cellphone,
sports glasses etc.
Risk posed by unsecured accessories
Accessories can fall off and get lost if they are
not properly secured.
– Check that the accessory is correctly locked in
and seated securely every time you use the
mobility device.
Risk of breakage due to excessive load
The KLICKfix adapter can break if too great a load
is applied.
– The maximum permitted load on the KLICKfix
adapter is 1 kg.
30
Fig. 4-1
Securing Accessory
1. Push accessory into KLICKfix adapter.
Accessory locks in securely.
Removing Accessory
1. Press red button and remove accessory.
The adapter can turn in 90° steps, allowing you to attach an
accessory from any of four different directions. Please refer
to the installation instructions which are available from your
Invacare provider or directly from Invacare.
More information on the KLICKfix system is available at
http://www.klickfix.com.
Fig. 4-2
1578997-J