BMW CE 04 Rider's Manual page 69

tone can be set by an autho-
rized BMW Motorrad retailer.
You can cancel a triggered
alarm signal at any time by
pressing the button 1 of the
radio-operated key without de-
activating the DWA.
If an alarm signal has been
triggered while the motorcycle
was unattended, the rider is
notified accordingly by an
alarm tone sounding once
when standby mode is turned
on. Then the DWA LED
indicates the reason for the
alarm signal for one minute.
Light signals on indicator
light:
1 blink: Tilt sensor 1
2 blinks: Tilt sensor 2
3 blinks: Standby mode is
turned on using unauthorized
ignition key.
4 blinks: Anti-theft alarm sys-
tem disconnected from vehi-
cle battery
5 blinks: Tilt sensor 3
Deactivation
Version 1:
Emergency-off switch in oper-
ating position.
Turn on standby mode
( 52).
Turn signals blink once.
Confirmation tone sounds
once (if programmed).
DWA is turned off.
Version 2:
Press button 1 of the radio-
operated key once.
If the alarm function is de-
activated using the radio-
operated key and standby is
not then turned on, the alarm
function will be reactivated au-
tomatically after approximately
30 seconds if
is turned on.
cally
Turn signals blink once.
Confirmation tone sounds
once (if programmed).
DWA is turned off.
63
Arm automati-