BMW CE 04 Rider's Manual page 42

36 DISPLAYS
Possible cause:
The engine control unit has di-
agnosed a fault.
Have the malfunction cor-
rected at a specialist work-
shop, preferably an authorized
BMW Motorrad retailer.
You may continue riding.
Communication fault in the
EME
is lit yellow.
lights up.
No communication
with drive electron-
ics. Multiple systems
affected. Have vehicle
checked by a specialist
workshop.
Possible cause:
The electrical machine elec-
tronics have diagnosed a com-
munication fault.
Have the malfunction
corrected as soon as possible
at a specialist workshop,
preferably an authorized
BMW Motorrad retailer.
Insulation fault in the high-
voltage system
is lit yellow.
Insulation fault
in high-voltage
system. Mod. continu-
ation possible. Drive
carefully to the nearest
workshop.
Possible cause:
An isolation fault has been de-
tected. A high-voltage cable or
a high-voltage component has
been damaged.
Have the fault rectified as
soon as possible by an autho-
rized BMW Motorrad retailer.
Severe insulation fault in the
high-voltage system
is lit red.
Insulation fault in
high-voltage sys-
tem. New start after en-
gine stop not possible.
Visit workshop immedi-
ately.
Possible cause:
A severe insulation fault has
been detected. A high-voltage
cable or a high-voltage compo-
nent has been damaged.After
the end of the ride, the vehicle
cannot be restarted. Damage
to the vehicle can be the result.
Contact a specialist workshop
immediately, preferably an