112
BMW EPOWER
Pay attention to the displays
on the charging cable.
The standard charging cable
automatically carries out all
necessary test steps. If LED 1
is lit and LED 2 is blinking, the
test was successful and the
vehicle is being charged.
If standby mode is turned on,
the note 2 appears. The icon 1
indicates that the charging
cable is connected, but the
charging operation has not yet
been started. You can select a
charging current limit or start
with the charging operation
immediately by turning off the
vehicle.
The icon 1 for the state of
charging plug detection ap-
pears. The state of charge 2
and the range 7 are displayed.
The charging time prediction 4
in conjunction with the range
prediction 6 indicates how long
the vehicle has to be charged
to achieve a particular expected
range. The target time 5 in-
dicates the time by which the
vehicle has reached a charge
of 100%. The target time is al-
ways based on the time set in
the vehicle. In addition to the
active charging current limit 8,
the maximum available charge
current level 3 is also displayed
if the infrastructure offers a
larger current than what has
been selected in the settings
menu. After a certain period of
time, the display is automat-
ically switched to Stand-by-
Modus (energy saving mode).
The charging operation is con-
tinued