BMW CE 04 Rider's Manual page 53

Table of Contents

Advertisement

Possible cause:
The TPM control unit has diag-
nosed a communication fault.
Contact a specialist work-
shop, preferably an authorized
BMW Motorrad retailer.
Tire pressure warnings not
available.
Side stand monitoring faulty
is lit yellow.
Side stand monitor-
ing defective. En-
gine stop at low speed!
Have checked by a spe-
cialist workshop.
Possible cause:
The side support switch or its
wiring is damaged. The elec-
trical machine is switched off
when the speed falls below
3 mph (5 km/h), and the ride
cannot be resumed.
Contact a specialist work-
shop, preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis not
completed
flashes.
Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able, as the self-diagnosis
function has not been com-
pleted. (The E-Scooter must
reach a specified minimum
speed before the system can
check operation of the wheel
speed sensors: min 3 mph
(min 5 km/h))
Ride off slowly. Please note
that the ABS function is only
available after the self-diagno-
sis has completed.
ABS fault
is lit yellow.
lights up.
Limited ABS avail-
ability! Onward
journey possible.
Ride carefully to next
specialist workshop.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is limited.
You may continue riding.
Take note of additional
information on special
situations that can lead to
47

Advertisement

Table of Contents
loading

Table of Contents