Table of Contents
Advertisement
62
OPERATION
Turn off standby mode.
Press button 1 on the radio-
operated key twice.
Activation takes approximately
30 seconds to complete.
Turn signals flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm system is ac-
tive.
To deactivate the tilt sen-
sor (for example, if you are
about to transport the elec-
tric scooter on a train and the
swaying movement of the
moving train could trip the
alarm), press button 1 on the
radio-operated key again dur-
ing the activation phase.
Turn signals flash three times.
Confirmation tone sounds
three times (if programmed).
Tilt sensor is deactivated.
Alarm signal
The DWA alarm signal can be
triggered by:
Tilt sensor
Switch-on attempt with an
unauthorized ignition key.
Disconnection of the DWA
from the vehicle battery (DWA
battery takes over the power
supply – alarm tone only, turn
signals do not flash)
If the radio-operated key
is within the reception
area, any alarm signal triggered
by the tilt alarm sensor is sup-
pressed.
If the DWA battery is dis-
charged, all functions remain
operational; the only difference
is that the alarm cannot be
triggered if the system is
disconnected from the vehicle
battery.
The duration of the alarm sig-
nal is approx. 26 seconds. Dur-
ing the alarm signal, an alarm
tone sounds and the turn sig-
nals blink. The type of alarm
Advertisement
Chapters
Table of Contents
