BMW CE 04 Rider's Manual page 134

128 RIDING
in position; do not place it on
the side stand or center stand.
ATTENTION
Pinching of components
Component damage
Do not pinch components,
e.g. brake lines or wiring
harnesses.
Lay tensioning belts at front
over lower fork bridge on
both sides and tension.
Secure the right rear tension-
ing belt at the retaining plate
of the footrest.
Secure the rear left tensioning
belt at the retaining plate of
the footrest.
Tension all tensioning belts
evenly; the E-Scooter should
be pulled down with maxi-
mum spring compression.