BMW CE 04 Rider's Manual page 154

148 MAINTENANCE
Visually inspect the brake pad
thickness on the left and right.
Direction of view: from rear,
looking at brake pads 1.
Front brake-pad wear
limit
min 0.22 in (min 5.6 mm)
(Friction lining with carrier
plate)
If the wear marks are no longer
clearly visible:
WARNING
Dropping below the mini-
mum pad thickness
Reduced braking action, dam-
age to the brake
In order to ensure the oper-
ating reliability of the brake
system, make sure that the
brake pads are not worn be-
yond their minimum thick-
ness.
Have brake pads renewed
at a specialist workshop,
preferably an authorized
BMW Motorrad retailer.
BMW Motorrad recommends
only installing genuine brake
pads.
Checking the rear brake pad
thickness
Park the E-Scooter, making
sure it is on level and firm
ground.