Table of Contents
Advertisement
The domestic socket outlet is
checked to see if the wiring is
incorrect
A check is carried out to see
if there is a ground wire con-
nection
The prerequisites for correct
charging are checked
The status displays/Check
Control messages are listed
in the "Displays" chapter.If
Check Control messages ap-
pear, they can be reset as fol-
lows:
Disconnect the standard
charging cable from the
voltage supply by pulling the
connector out of the domestic
socket outlet.
Re-insert the plug after 10
seconds.
Critical faults that indicate
damage to the standard
charging cable are not reset.
These faults include:
Relay welded (device perma-
nently faulty)
Temperature sensor faulty
Fault current test negative
DANGER
Use of damaged charging
cable.
Injury or damage as a result,
for example, of electric shock
or fire.
Do not use damaged charg-
ing cables.
Immediately discontinue use
of damaged charging cables
(e.g., if there is damage to
the casing or cable).
Have the fault rectified as
soon as possible by an autho-
rized BMW Motorrad retailer.
Connect the charging cable 2
to the charging socket 1.
The charging cable is electri-
cally locked if standby mode
is turned off or the vehicle is
being charged.
111
Advertisement
Chapters
Table of Contents
