Table of Contents
Advertisement
Figure 84. Removing the M.2 drive
After you finish
1. Install a new M.2 drive if necessary, see
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install an M.2 drive
Follow this procedure to install an M.2 drive.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
About this task
Attention:
• Read
"Safety inspection checklist" on page iv
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
ThinkSystem ST50 V2 Maintenance Manual
106
"Install an M.2 drive" on page
and
"Installation guidelines" on page 41
106.
to ensure that you
Advertisement
Table of Contents
